120L Plastic Water/Chemical Drum Extrusion Blow Molding Machine

• Type: Extrusion Blow Molding Machine
• Raw Material: HDPE
• Making Method of Parison: Extrusion-Blow Molding
• Automation: Automatic
• Computerized: Computerized
• Certification: CE
• Model NO.: ABLD100
• Application: Drum, Roadblocks, Plastic Model, out-Door Base
• Max. Product Volume: 120L
• Suitable Material: PP, PE, ABS
• Screw Diameter: 100 mm
• Drive Motor: 45 Kw
• Output/Capacity: 170 Kg/Hr(HDPE Particle)
• Vertical Adjustment of Head: 500 mm
• Accumulator Capacity: 20L(15kghdpe)
• Clamping Force: 780 Kw
• PLC Control: Mitsubishi
• Transport Package: Film Packaging
• Specification: ABLD100
• Trademark: DAWSON
• Origin: Jiangsu Zhangjiagang
• HS Code: 8477301000
• Production Capacity: as Per Samples

Product Description

Blow Molding 

Here mainly refers to hollow blow molding (also known as blow moulding)
Is a method of inflating a hot-melt parison closed in a mold to form a hollow product by means of gas pressure, is the most commonly used plastic processing method, at the same time, it is also a plastic molding method that develops faster.

The mold for blow molding has only a female mold (female mold). Compared with injection molding, the equipment has lower cost, strong adaptability, good formability (such as low stress), and can form products with complex undulation curves (shapes). .


Extrusion blow molding machine ABLD100 

extruder
1	Screw diameter	100mm
2	L/D ratio	24:1
3	Screw speed	15~50r.p.m.
4	Drive motor	45Kw
5	Heating zone with cooling fan	6 zone
6	Output/Capacity	170 Kg/hr(HDPE  particle)
8	Heating capacity	25.1 kw
9	Vertical adjustment of head	500mm
10	Forward/Backward adjustment of  head	500mm
11	Groove feed barrel cylinder	Have IKV
12	Gear box	Hard gear decelerator
13	Ladder and safety rails	Have
Accumulator  Head
1	Accumulator capacity	20L(15kgHDPE)
2	Design	First in and first out
3	Heating zone	6 zone
4	Heating capacity	25.1kw
5	Max die&pin diameter	450mm
6	Die head axis with pre-blow	Ø120mm
7	Accumulator push-out stroke measurement	Transducer  Italy Gefran
8	Injection pressure	12 Mpa
9	Extruder stop	Have
CLAMPING UNIT
1	Tie bar	Two tie bar
2	Platen size	900(W)X1400(H)
3	Length of mold	900-960mm
4	Clamping force	780KN
5	Close/Open stroke	880-1700mm
6	Mold weight	Max.  5000 kg
7	Clamping stroke measurement	Transducer  Italy Gefran
8	Hydraulic valve	Taiwan Hitech
9	Number of hydraulic cylinder	1
10	High pressure	14 Mpa
11	Support parts for platen movement	Liner Guide
HYDRAULIC SYSTEM
1	Main motor/vice motor	AC15Kw/15Kw
2	Hydraulic  valve	Taiwan Hitech
3	Hydraulic pump	Taiwan Hitech
4	Oil tank capacity	850L
5	Operating pressure	12 Mpa
6	Cooling water for oil	fixed
7	Control of oil level	be observed dipstick
PNEUMATIC SYSTEM
1	Operating pressure	0.8 Mpa
2	Blow pressure	0.8 Mpa
3	Needle blow circuit	High & low pressure
4	Intermittent blow	Have
5	Controlled support air for parison	Have
6	Air Valves	AIRTAC
7	Quick exhaust for support air	Have
PARISON CONTROL
1	Programmer	JAPAN MOOG
2	Servo valve	MOOG
3	Servo cylinder	Intergret of die head
4	Hydraulic pack	TAIWAN YOSHE Variable Displacement Piston Pumps
ELECTRICITY
1	Contactor	Schneider
2	Total connected load (approx.)	114kw/h
3	Average energy consumption (approx.)	42 kw/h
WATER COOLING
1	Machine water consumption	6000L/h
2	Mold water consumption	6000L/h
AIR CONSUMPTION
1	Compressed air consumption	1.2 kgf/cm2, 3000 L/min
OTHER FEATURES
1	PLC control	MITSUBISHI
2	Human machine interface	Hitech
3	Recipe storage in hard disk	Available
HEATING CONTROL
1	Power supply to heating element	Relay + Contactor	Japan Omron+Korea LG
2	Control	PLC controle
3	Type of thermocouple	K Type
4	Adjustable lower and upper limit alarm	Have
5	Cold start prevention for screw	Have
6	Alarm for thermocouple and heating element breakage	Have, heating element breakage by anperemeter
7	Pre-heating function	Have
Die-ring AND Die-pin
1	one sets of die & pin	One set according to customer
2	Test material	Buyer supply 300kg material to seller for machine testing
OPTION
1	Bottom blow (hydraulic) and sealing unit (pneumatic)	Double blow pin (including expand & up-down & parison seal)
2	Robot	Have
3	Machine Dimension	6.8×3.3×5
4	Total weight	20